FA24V-LBASE Wireless Illumination Display Board

Dimensions: 210mm x 265mm x 49mm

Gross Weight: 750g

Electrical properties

🎇Main Functions

1. When the base placing in vertical type, a magnetic field with 40cm x 21cm x 26cm can be generated. In horizontal type, the field with 26cm x 21cm x 20cm. And the magnetic field can be used to light up the matched LED beads.

2. Low-power consumption. High-effect with lighting more than 250 LED beads stably at the same time.

❗Cautions

1.No access for persons with pacemakers.

2.Do not place large metal objects or electronic products on near to the base.

3.Do not place the base on the floor or metal table.

4.Please follow the legal operation order, plug the power then switching on.

5.Avoid direct sunlight or place the base in airtight condition.

6.Do not touch any chemical solvents such as alcohol. With a clean dry cloth to wipe the surface of stand gently.

7.Do not disassemble, repair or remodel without authorization.

8.Waste packaging and products should be properly classified and handled.

💬Setup Instructions

1. Take apart the packing chest, take out the base and the pillar joints.

2. Put the base on table top and plug the DC adapter with 24V0.6A.

3. When the base in vertical placement, the pillar joints may be used to combine with the BANDAI Action Base (Type B4 or B5).

📝Using Guidance

1. Plug the DC power supply and switch on.

2. When the base is in working. Put the LED beads in the display area, and adjust their angle, the LED beads are lighted up.

3. The brightness of LED beads may be different in display area. Adjust LED beads depending on requirement.

4. Different LED beads display effect may have some differences. This is a normal phenomenon.